Factory Cheap Hot Explosion Proof Flow Heater - EJMI heating cable – Weineng

Feature

EJMI heating cable is a special heating cable with stainless steel (red copper) as outer sheath, electric heating material as heating element, and magnesium oxide powder as insulation. The calorific value of EJMI heating cable is related to the working voltage, heating core wire and cable length.
The heating cable has the advantages of high temperature resistance, waterproof, explosion-proof, not easy to age, long service life, high mechanical strength, safety and reliability.

Application

Mainly used in: metallurgical casting system (solution pipeline insulation and deblocking); power system (steam pipeline insulation and other external water pipe antifreeze); heating insulation system (buildings, warehouses, nurseries, poultry emulsified heating insulation, airport runways, sports stadium runways) ; Oil platforms and ocean-going ships (deck anti-freezing, cabin heating, fluid pipes and mechanical equipment heating and heat preservation) and all places that need heat preservation, anti-freezing, heating, containers, pipes, etc.

Production Process

Markets & Applications

FAQ

1.Are you factory?
Yes, we are factory, all customers are more than welcome to visit our factory .

2.What is trace heating used for ?
Trace heating can be used to protect pipes and vessels from freezing by maintaining the temperature at a certain level above freezing point. This is done by supplying heat energy to balance the amount of heat lost through conduction.

3.Can you put heat trace on PVC pipe ?
PVC pipe is dense thermal insulation. PVC pipe is usually rated as being able to withstand temperatures between 140 to 160°F. The trick is to insure the heat trace cable will maintain the contents within the PVC pipe at a desired temperature, but never to approach the pipe rating temperature.

4.Can heat trace touch itself?
CAUTION: For series constant-watt trace heaters (HTEK, TEK, TESH), do not allow the heating portion of the trace heater to touch, cross over, or overlap itself.

5.Does heat tape use a lot of electricity?
Typical heat tape burns electricity at six to nine watts per foot per hour. That means each 100 feet of heat tape operating 24/7 can translate to an added monthly cost of $41 to $62 to operate heat tape, says Eileen Wysocki, energy auditor for Holy Cross Energy.

6.How Does heat trace tape work?
Electric heat tracing, heat tape or surface heating, is a system used to maintain or raise the temperature of pipes and vessels using heat tracing cables. … The pipe is usually covered with thermal insulation to retain heat losses from the pipe. Heat generated by the element then maintains the temperature of the pipe.

Packing

QC & Aftersales Service

Certification

Contact information