Factory source Atex Certificated Immersion Heater - Single phase constant power parallel electric heating tape – Weineng

Feature

The heating value per unit length of the constant power heating belt is constant. The longer the heating belt used, the greater the output power. The heating tape can be cut to length according to actual needs on site, and is flexible, and can be laid close to the surface of the pipeline. The braided layer of the outer layer of the heating belt can play a role in heat transfer and heat dissipation, improve the overall strength of the heating belt, and also be used as a safety grounding wire

Application

Generally used for heat tracing and insulation of small pipelines or short pipelines in pipe network systems

FAQ

1.Are you factory?
Yes, we are factory, all customers are more than welcome to visit our factory .

2.What are the available product certifications?
We have certifications such as: ATEX, CE, CNEX. IS014001, OHSAS18001,SIRA, DCI. Etc

3.Can you overlap heat trace?
Do not overlap heat tape over itself. Do not wrap tape at a 90 degree bend. Install according to the instructions. Not all heat tapes can be used over plastic pipes.

4.Can you leave heat tape plugged in?
When the temperature drops, a small thermostat (built in on most models) calls for power that produces heat, then cuts off power after the temperature rises. You can leave these models plugged in. … The Consumer Product Safety Commission (CPSC) says they no longer collect data on heat tape-related accidents.

5.What if heat tape is too long?
Usually you can wrap the tape around the pipe as you install it. You can then add or subtract wraps to adjust the length and make it come out where you want. This works well for just a short amount of slack.

Production Process

Markets & Applications

Packing

QC & Aftersales Service

Certification

Contact information