High definition Anti-Explosion Fuel Gas Heater - Electric heating molten salt furnace – Weineng

Short Description:

Product Detail

Product Tags

Feedback (2)

We know that we only thrive if we will guarantee our combined cost competiveness and high-quality advantageous at the same time for Heat Tracing On Pipe , Custom Tubular Heater , Screw In Electric Heater Factory , Wanting on the long run, a protracted way to go, continually striving to become the all team with full enthusiasm, one hundred times the confidence and put our company created a beautiful environment, advanced merchandise, good quality first-class modern business and get the job done hard!

High definition Anti-Explosion Fuel Gas Heater - Electric heating molten salt furnace – Weineng Detail:

Feature

It has the advantages of uniform heating, simple operation, safety and environmental protection, energy saving, high temperature control accuracy, and low manufacturing pressure. Can be applied to the explosion-proof zone II of the factory, and the explosion-proof level can reach Class C.

Application

It is used in oil refineries, offshore platforms, chemical and petroleum companies and places requiring indirect heating by heat medium.

FAQ

1.Are you factory?
Yes, we are factory, all customers are more than welcome to visit our factory .

2.What are the available product certifications?
We have certifications such as: ATEX, CE, CNEX. IS014001, OHSAS18001,SIRA, DCI. Etc

3.What are the available Temperature Code ratings?
Available Temperature Code ratings are T1, T2, T3, T4, T5 or T6.

4.What terminal enclosures are available?

Two different types of terminal enclosures are available – a square/rectangular panel
style design suitable for IP54 protection or a round fabricated design suitable for IP65 protection. Enclosures are available in carbon steel or stainless steel construction.

5.What type of temperature sensors are provided with the heater?

Each heater is provided with temperature sensors at the following locations:
1) on the heater element sheath to measure maximum sheath operating temperatures,
2) on the heater fange face to measure maximum exposed surface temperatures, and
3) An Exit temperature measurement is placed on the outlet pipe to measure the temperature of the medium at the outlet. The temperature sensor is a thermocouple or PT100 thermal resistance, according to customer requirements.

Production Process