Operating rules and performance characteristics of heavy oil electric heaters and medium heat electric heaters

I have also introduced a lot of products about electric heaters. Today, of course, it also revolves around this topic, specifically involving heavy oil electric heaters and medium-heat electric heaters. What are their respective characteristics and usage methods?

The heavy oil electric heater is actually an industrial heater, and its main working value is fuel oil, and the purpose of heating equipment can be achieved by the combustion of fuel oil. In today’s mechanized era, the effect of heavy oil electric heaters is very significant.

If it is the first time to use a heavy oil electric heater, be sure to check its electrical insulation. If the insulation is too low, it can be preheated with heavy oil for a period of time before powering on.

After the insulation reaches the standard, the inlet and outlet valves of the heavy oil electric heater can be opened, but the bypass valve must be closed at the same time. After 10 minutes, there is oil temperature at the outlet of the hand feel, and power is supplied again under the conditions. During this process, it is forbidden to open the bypass valve when the heater is turned on.

What needs to be emphasized is the operation sequence of the heavy oil electric heater. When it is turned on, the oil is sent first and then the electricity is sent. When it is turned off, it is the opposite. The power is cut off first and then the oil is cut off. When the oil does not flow in the fault state, the electric heater should be turned off in time.

What I saw here is a medium-heat electric heater, which is a relatively small electric heater, so it is very convenient to use before use, especially in transportation and storage. It is precisely because of the small size of the medium thermoelectric heater that it occupies a very small area, leaving space for other industrial operations to save land.

But its power is very large, that is because the clustered tubular electric heating element is used in the medium thermoelectric heater, which can greatly improve the working efficiency of the medium thermoelectric heater. Not only that, the medium thermoelectric heater also has the advantages of fast thermal response speed and wide application range.

Jiangsu Weineng Electric Co.,Ltd is profession manufacturer of various types of industrial electric heater, everything is customized in our factory, Should you have any questions please feel free to come back to us.

Contact: Lorena
Email: inter-market@wnheater.com
Mobile: 0086 153 6641 6606 (Wechat/Whatsapp ID)


Post time: Aug-09-2022