Since there are various types of electric heaters, it is not easy for users to choose a suitable one, and at least have a basic understanding of a commonly used electric heater. Take the flanged electric heater as an example, do you know its structure, performance and working principle?
Start with the analysis of the structural layout of the flanged electric heater. The equipment welds multiple heating tubes on the flange, mostly using argon arcs. Of course, the form of a fastening device can also be used to weld each electric heating tube by a tight firmware to facilitate centralized heating.
At the same time, the sealing part of the fasteners of the flanged electric heater adopts a scientific process, and it is extremely convenient to replace a single piece, which greatly saves the maintenance cost in the future. And the overall structure will become more compact; it is precisely because the flanged electric heater is short and dense as a whole, so the stability is good, and the installation does not require brackets.
The second is about the performance of the flanged electric heater. Compared with other electric heaters, its surface power is large, which makes the surface load of air heating 2 to 4 times. With this, the equipment is mainly used for open type, Closed solution tank and circulation system.
The flanged electric heater adopts U-shaped tubular electric heating element, and is assembled on the flange cover according to the power configuration requirements according to the design specifications for heating different media, and inserted into the material to be heated. When the heating element works, a large amount of heat is transmitted to the heated medium to increase the temperature of the medium to meet the required process requirements.
When the medium temperature reaches the set value required by the process, the flanged electric heater control system adjusts the output power of the electric heater after PID operation according to the temperature sensor signal, and realizes temperature control for the resistive load of the heating element, so that the medium temperature uniform and meet the required requirements.
Jiangsu Weineng Electric Co.,Ltd is profession manufacturer of various types of industrial electric heater, everything is customized in our factory, Should you have any questions please feel free to come back to us.
Contact: Lorena
Email: inter-market@wnheater.com
Mobile: 0086 153 6641 6606 (Wechat/Whatsapp ID)
Post time: Jun-01-2022