PriceList for Electric Gas Heater For Industrial - Constat wattage electric heating tape – Weineng

Feature

The heating value per unit length of the constant power heating belt is constant. The longer the heating belt used, the greater the output power. The heating tape can be cut to length according to actual needs on site, and is flexible, and can be laid close to the surface of the pipeline. The braided layer of the outer layer of the heating belt can play a role in heat transfer and heat dissipation, improve the overall strength of the heating belt, and also be used as a safety grounding wire.

In addition to the characteristics of a single-phase heating cable, the three-phase heating cable also has the following characteristics:

1. The maximum allowable length of a three-phase heating belt with the same power is three times that of a single heating belt

2. The three-phase belt has a large cross section and a large heat transfer area, which can improve the transmission efficiency.

Application

Generally used for heat tracing and insulation of small pipelines or short pipelines in pipe network systems.

The three-phase parallel tape is generally suitable for heat tracing and insulation of large pipe diameters, pipe network system pipelines and tanks.

FAQ

1.Are you factory?
Yes, we are factory, all customers are more than welcome to visit our factory .

2.What is heat tape for roofs?
Heat tape is a protected electrical cord that, when used in gutters and pipes, can stop them from freezing. Also known as gutter heat cables or gutter heaters, heat tape helps to prevent ice dams from forming. … But, heat tape for roofs and gutters also comes with its own set of quirks.

3.Does heat tape get warm?
Tucked away in a garden shed or crawl space, the tapes get hot in summer, cold in winter and soaked with moisture off and on year-round. Sadly, heat tape has the potential to cause fires in homes and businesses.

4.Can you cut heat tape to length?
With the exception of cut-to-length heat tape (which is not available for online sale, though you can contact us to find out more), you cannot trim heat tape to length. in a grounded version for applications in ordinary locations up to 305°F.

5.Can heat trace touch itself?
Constant wattage heat trace and MI cable cannot cross or touch itself. … Self-regulating heat trace cables, however, would adjust to this temperature increase, making them safe to cross or overlap. As with any electrical system, though, there are always potential dangers with using heat trace or heat cables.

Production Process

Markets & Applications

Packing

QC & Aftersales Service

Certification

Contact information