Wholesale Industrial Electric Circulation Heater - Constant Power / Constant Wattage trace heater – Weineng

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We purpose to understand high quality disfigurement with the output and supply the top service to domestic and overseas buyers wholeheartedly for Duct Heater Elements , Screw Plug Heater , Industrial Electric Heating Elements , We welcome new and aged buyers from all walks of lifetime to make contact with us for potential small business associations and mutual success!
Wholesale Industrial Electric Circulation Heater - Constant Power / Constant Wattage trace heater – Weineng Detail:

Feature

The heating value per unit length of the constant power heating belt is constant. The longer the heating belt used, the greater the output power. The heating tape can be cut to length according to actual needs on site, and is flexible, and can be laid close to the surface of the pipeline. The braided layer of the outer layer of the heating belt can play a role in heat transfer and heat dissipation, improve the overall strength of the heating belt, and also be used as a safety grounding wire.

Application

Generally used for heat tracing and insulation of small pipelines or short pipelines in pipe network systems

FAQ

1. Are you factory?
Yes, we are factory, all customers are more than welcome to visit our factory .

2. What is difference between self regulating and constant wattage heat trace?
Pipe trace constant wattage has a higher temperature output and tolerance. It consumes more power so it requires a controller or thermostat and some types can be cut-to-length. Self-regulating cables have a lower temperature output and tolerance. They consume less power, but require larger breakers.

3. How many watts is heat trace?
The amount of primary heat required is proportional to the time required to achieve the final temperature. If one hour heat up requires 10 watts, then a two hour heat up requires 5 watts per hour for two hours. Conversely, a half hour heat up requires 20 watts to heat the system.

4. What is trace heating used for ?
Trace heating can be used to protect pipes and vessels from freezing by maintaining the temperature at a certain level above freezing point. This is done by supplying heat energy to balance the amount of heat lost through conduction.

Production Process

Industrial electric heater (1)

Markets & Applications

Industrial electric heater (1)

Packing

Industrial electric heater (1)

QC & Aftersales Service

Industrial electric heater (1)

Certification

Industrial electric heater (1)

Contact information

Industrial electric heater (1)


Product detail pictures:

Wholesale Industrial Electric Circulation Heater - Constant Power / Constant Wattage trace heater – Weineng detail pictures


Related Product Guide:

The key to our success is "Good Products Good quality, Reasonable Value and Efficient Service" for Wholesale Industrial Electric Circulation Heater - Constant Power / Constant Wattage trace heater – Weineng , The product will supply to all over the world, such as: Honduras, Borussia Dortmund, Palestine, Abiding by our motto of "Hold well the quality and services, Customers Satisfaction", So we give our clients with high quality products and solutions and excellent service. Be sure to feel free to contact us for further information.
  • It is a very good, very rare business partners, looking forward to the next more perfect cooperation!
    5 Stars By Jerry from moldova - 2017.11.20 15:58
    The customer service reprersentative explained very detailed, service attitude is very good, reply is very timely and comprehensive, a happy communication! We hope to have a opportunity to cooperate.
    5 Stars By Lauren from Malaysia - 2017.09.22 11:32
    Write your message here and send it to us