Industrial electric circulation heater
Special sizes, wattage, and materials are available upon request
Units are available with larger vessels and heavier flanges
Can be supplied with stainless steel parts and special design terminal boxes for heat protection and use in high temperature conditions.
Insulated upon request
Easy to install
Compact
Clean
Durable
Highly energy efficient
Provide fast response and even heat distribution
Provide greater wattage in a smaller heater bundle
Provide maximum dielectric strength
Compatible with standard industry piping and safety standards
Designed and built for safety
Works in conjunction with Control Panels
Clean water, Freeze protection, hot water storage, Boiler and water heaters, cooling towers, Solutions not corrosive to copper
Hot water, steam boilers, mildly corrosive solutions (in rince tanks, spray washers)
Oils, inline gas heating, Mildly corrosive liquids, stagnant or heavy oils, high temperature, low flow gas heating
Process water, soap and detergent solutions, Soluble cutting oils, demineralized or deionized water
Mildly corrosive solutions
Severe corrosive solutions, demineralized water
Light Oil, Medium Oil
Food Equipment
1.Are you factory?
Yes, we are factory, all customers are more than welcome to visit our factory .
2.What are the available product certifications?
We have certifications such as: ATEX, CE, CNEX. IS014001, OHSAS18001,SIRA, DCI. Etc
3.How to Choose an Industrial Heater?
It is important to consider the specifics of your application prior to selecting the heater to use. Of primary concern is the type of medium being heated and the amount of heating power required. Some industrial heaters have been specially designed to function in oils, viscous, or corrosive solutions.
However, not all heaters can be used with any material. It is important to confirm the desired heater will not be damaged by the process. In addition, it is necessary to select an electric heater that is appropriately sized. Be sure to determine and verify the voltage and wattage for the heater.
One important metric to consider is Watt Density. Watt density refers to the heat flow rate per square inch of surface heating. This metric shows how densely the heat is being transferred.
4.What are the available heater fange type, sizes and materials?
WNH industrial electric heater, flange size between 6"(150mm)~50"(1400mm)
Flange standard: ANSI B16.5, ANSI B16.47, DIN, JIS (Also accept customer requirements)
Flange material: Carbon steel, Stainless steel, Nickel-chromium alloy, or other required material
5.What other controls are needed for safe operation of the process heater?
The heater needs a safety device to ensure the safe operation of the heater.
Each heater is equipped with an internal temperature sensor, and the output signal must be connected to the control system to realize the over-temperature alarm of the electric heater to ensure the safe operation of the electric heater. For liquid media, the end user must ensure that the heater can only work when it is completely immersed in the fluid. For heating in the tank, the liquid level needs to be controlled to ensure compliance. The outlet temperature measuring device is installed on the user's pipeline to monitor the exit temperature of the medium.
