Routine maintenance, maintenance, calibration:
1. Carry out maintenance and maintenance according to the requirements of the instruction manual.
2. During the operation of the equipment, attention should be paid to the scope specified in the technical requirements. If it exceeds the specified range, it should be stopped in time for inspection.
3. If an abnormality is found during the operation of the equipment, the heater should be checked in time.
4. The entire electric heater should be kept working in a clean environment.
5. Make the operation and maintenance records of the electric heater equipment on time.
6. During the idle period of the electric heater, it should be operated at regular intervals to ensure that the equipment has a good standby state.
7. During normal use, the equipment should be kept clean to prevent the parts from loosening and rusting. If any parts are found to be loose, they should be tightened in time.
8. Note: It is strictly forbidden to open the electric heater cover with electricity! It is strictly forbidden to damage the explosion-proof surface! Bolt yield stress ≥640MPa (grade 8.8)
Maintenance and maintenance during operation:
When the electric heater equipment is running, the operation status of the equipment should be observed at any time. If any abnormality is found, the power should be cut off in time to deal with it.
Inspection period:
1. The electric heater should be overhauled every time the well is lifted and put into use again;
2. The electric heater maintenance should be carried out once a year;
Normal maintenance procedure:
1. Only specially trained personnel can start the machine for maintenance and repair work.
2. In addition to complying with the operating procedures of the equipment, pay attention to the following safety measures:
3. Maintenance work can only be carried out when the electric heater is powered off.
4. Make sure that the electric heater has no tools, parts or other objects left in the device before turning it on.
5. Regularly check the safety of the ground wire of the electric heater equipment.
6. If the electric heater equipment is found to be abnormal during operation, it should be checked immediately by power outage, and the operation should be carried out according to the instruction manual.
Maintenance and maintenance during long-term parking:
When the electric heater is parked for a long time, the power supply should be completely cut off, and the anti-rust treatment should be done.
Jiangsu Weineng Electric Co.,Ltd is profession manufacturer of various types of industrial electric heater, everything is customized in our factory, could you please kindly share your detailed requirements, then we can check in details and make the design for you.
Contact: Lorena
Email: inter-market@wnheater.com
Mobile: 0086 153 6641 6606 (Wechat/Whatsapp ID)
Post time: Jan-11-2022