What do I need to do for the daily maintenance of the thermal oil electric heater?

The life span of any heat-conducting oil electric heater cannot be unlimited. Some of their parts will gradually wear out, corrode, scratch, oxidize, aging, and deform during use. Therefore, the daily maintenance of heat-conducting oil electric heater Indispensable, in order to reduce unnecessary failures.

The heat-conducting oil electric heater is a safe, high-efficiency, energy-saving, low-pressure special industrial furnace that can provide high-temperature heat. The heat-conducting oil is used as the heat carrier, and the heat carrier is circulated through a hot oil pump to transfer heat to the heat-using equipment. During the maintenance process, avoid dust accumulation in the electrical control cabinet, and use compressed air to clean it frequently to ensure good electrical contact.

The heat-conducting oil of the electric heater should not exceed the maximum allowable temperature. Generally, the heat-conducting oil should be sampled and tested every 2 to 3 months after half a year of use, and be careful not to mix different oils. At the same time, the temperature measuring instrument should be checked frequently, and regular measurement should be carried out to prevent the thermal resistance of the temperature measuring node from increasing, resulting in incorrect operation of the temperature.

Regarding the installation of the circulating pipeline in the heat-conducting oil electric heater, it is necessary to facilitate the removal of the gas in the pipe; if there is a leakage, the operation should be stopped in time and can be used after repair. If it is found that the oil temperature is difficult to increase during the operation of the equipment, check whether the pipeline is unblocked, whether the valve is wrong, whether the filter is blocked, etc., and the filter should be removed and washed regularly.

As a user of thermal oil electric heating furnace. Detailed operating procedures and regular maintenance and repair systems should be customized. Operators should be very familiar with and master the essentials of this equipment; and always check the electric heating tube contacts, fuses, instruments, electrical contact pressure gauges and relays.

Since the heat-conducting oil electric heater adopts precision instruments, severe vibration is strictly prohibited during transportation and installation. Moreover, after long-term use, after replacing the electric heating element, the wiring must be reliable, and the heater must be tested for leaks to prevent leakage of heat transfer oil, poor electrical contact, and fire causing fire accidents.

Jiangsu Weineng Electric Co.,Ltd is profession manufacturer of various types of industrial electric heater, everything is customized in our factory, could you please kindly share your detailed requirements, then we can check in details and make the design for you.

Contact: Lorena
Email: inter-market@wnheater.com
Mobile: 0086 153 6641 6606 (Wechat/Whatsapp ID)


Post time: Mar-23-2022